Big Clem Bulk Blast Machines
Big Clem Bulk Blast Machines

Unbeatable for production, strength and safety

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.

Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationaryyard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.

Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.

Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.

Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces

Available Literature:
Big Clem Bulk Blast Machines

 

Call For Pricing
Manufacturer
Contractor Series Blast Machines
Contractor Series Blast Machines

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

$0.00$4,122.00
Manufacturer
0.5 Cuft Classic Blast Machines
0.5 Cuft Classic Blast Machines

Model 1028; 0.5 cuft w/MSv TLR-50 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Requirements for Operation
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Available Literature:

$1,827.00 SKU: 21051
Manufacturer
0.5 Cuft Classic Blast Machines
1 Cuft Classic Blast Machines

Model 1042; 1 cuft w/MSv TLR-50 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Requirements for Operation
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Available Literature:

$1,944.00 SKU: 21053
Manufacturer
10 Cuft Classic Blast Machines
10 Cuft Classic Blast Machines

Model 3661 holds 10 cubic feet of abrasive.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Available Options

Stock # Piping Size Description Price
21077 1-1/4″ 3661; 10 cuft TLR-300 w/AQV Quantum/ACS 7,722.00
$7,722.00 SKU: 21077
Manufacturer
2 Cuft Classic Blast Machines
2 Cuft Classic Blast Machines

Model 1642 holds 2 cubic feet of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 5 (5/16-inch) nozzle.
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Stock # Piping Size Working Pressure Rating Description Price
27501 1″ 150 psi 1642; 2 cuft TLR-100 w/MQV Quantum 2,930.00
$2,808.00 SKU: 27501
Manufacturer
2 Cuft Contractor Blast Machines
2 Cuft Contractor Blast Machines

The high-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

Call For Pricing
Manufacturer
20 Cuft Classic Blast Machines
20 Cuft Classic Blast Machines

Model 3661 holds 10 cubic feet of abrasive.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Available Options

$8,892.00 SKU: 21078
Manufacturer
clemco model 1648 3 cuft classic Blast Machine
3 Cuft Classic Blast Machines

Model 1648 holds 3 cubic feet of abrasive providing approximately 15 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle.
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Available Options

Stock # Piping Size Model 1648 3 cuft Portable Price
01179 1-1/4″ TLR-300 with FSV Yes 3,168.00
23767 1-1/4″ TLR-300 w/MQV Quantum Yes 3,168.00
$3,200.00
Manufacturer
4 Cuft Contractor Blast Machines
4 Cuft Contractor Blast Machines

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

$3,798.00 SKU: 21505
Manufacturer
6 Cuft Classic Blast Machines
6 Cuft Classic Blast Machines

Model 2452 6 cuft TLR-300 w/MQV Quantum holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Requirements for Operation
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Available Literature:

$3,627.00 SKU: 23769
Manufacturer
Contractor Series Blast Machines
6 Cuft Contractor Blast Machines

6 cuft TLR-300 w/MQV Quantum

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

Item # Description Price
21610 6 cuft contractor blast machine with Pressure-release Millennium remotes
Pneumatic
4,122.00
$4,122.00 SKU: 21610
Manufacturer
6 Cuft Lo-Pot Classic Blast Machines
6 Cuft Lo-Pot Classic Blast Machines

MOdel 2443; 6 cuft Lo-Pot TLR-300 with LPV Lo-Pot holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle. The Lo-Pot Blast Machines are designed for ease in abrasive loading.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Stock # 21070

Available Literature:

$3,573.00 SKU: 21070
Manufacturer