Big Clem Bulk Blast Machines
Big Clem Bulk Blast Machines

Unbeatable for production, strength and safety

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.

Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationaryyard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.

Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.

Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.

Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces

Available Literature:
Big Clem Bulk Blast Machines

 

Call For Pricing
Manufacturer
Classic Blast Machines
Classic Blast Machines

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Requirements for Operation
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Available Literature:

$1,827.00$3,627.00
Manufacturer
Contractor Series Blast Machines
Contractor Series Blast Machines

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

$0.00$4,122.00
Manufacturer
0.5 Cuft Classic Blast Machines
0.5 Cuft Classic Blast Machines

Model 1028; 0.5 cuft w/MSv TLR-50 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Requirements for Operation
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Available Literature:

$1,827.00 SKU: 21051
Manufacturer
Blast Pot
0.9 cu ft Blast Pot

This miniBlaster is a pressure hold system. The blast pot retains pressure when the deadman control is released, minimizing abrasive loss with start-up and shut-down and providing faster response. Thompson® Valve II controls.

Specifications

Maximum working pressure: 125 psi (8.6 bar)
Piping size: 3/4″
Weight: 141 lbs/64 kg

Features

  • Thompson Valve II abrasive metering valve
  • Auto air valve
  • G2 deadman
  • Manual pop-up and blowdown
  • 25′ twinline control hose
  • 25′ blast hose assembly
  • 1/8″ ceramic nozzle
  • Screen

Download:

Owners Manual

Call for price
Manufacturer
0.5 Cuft Classic Blast Machines
1 Cuft Classic Blast Machines

Model 1042; 1 cuft w/MSv TLR-50 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Requirements for Operation
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Available Literature:

$1,944.00 SKU: 21053
Manufacturer
Schmidt 1.5 Cu Ft Blast Pot
1.5 cu ft Blast Pot

Portable blaster with wheels. MV 2®I/ComboValve® abrasive metering valve and controls.

Specifications

Maximum working pressure: 150 psi (10.3 bar)

Piping size: 1″

Weight: 170 lbs/59 kg

Features

  • 90° cone bottom
  • Pneumatic remote controls
  • 55′ twinline control hose
  • G2 deadman control
  • Optional moisture separator
  • Optional electric controls
  • Optional relief valve
  • Available as blaster Package A, B or C
Call For Pricing
Manufacturer
10 and 20 cu ft Blast Pot
10 and 20 cu ft Blast Pot

These Schmidt® blasting systems in 10 and 20 cu. ft. sizes are designed to meet contractor needs for larger projects or are common in industrial/blast room applications. Smaller than a bulk tank yet larger than the standard 6-bag pot, they can easily accommodate multiple outlets for increased productivity.

The 10 cu. ft. system is available in either MV 2®/ComboValve® configuration or as a pressure-hold system using the Thompson® Valve II controls. The 20 cu. ft. system is a pressure-hold system only.

A wide range of options is available for these blasters to customize them specifically for your blasting operation.

Call For Pricing
Manufacturer
10 Cuft Classic Blast Machines
10 Cuft Classic Blast Machines

Model 3661 holds 10 cubic feet of abrasive.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Available Options

Stock # Piping Size Description Price
21077 1-1/4″ 3661; 10 cuft TLR-300 w/AQV Quantum/ACS 7,722.00
$7,722.00 SKU: 21077
Manufacturer
Clemco Big Clem bulk Blast Machine 120 cuft
120 Cuft Big Clem Bulk Blast Machines

Unbeatable for production, strength and safety

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.

Big Clems are offered in three sizes: 60, 120 and 160 cubic feet(pressure vessel abrasive volume). Each size is available as stationary,yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.

Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.

Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.

Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces

Available Literature:
Big Clem Bulk Blast Machines

Call for a Quote on the 120 Cuft. Big Clem Bulk Blast Machine

Call For Pricing SKU: 24628
Manufacturer
Clemco Big Clem bulk Blast Machine 160
160 Cuft Big Clem Bulk Blast Machines

Unbeatable for production, strength and safety

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.

Big Clems are offered in three sizes: 60, 120 and 160 cubic feet(pressure vessel abrasive volume). Each size is available as stationary,yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.

Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.

Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.

Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces

Available Literature:
Big Clem Bulk Blast Machines

Contact KleenBlast for a quote on 160 Cuft Big Clem Bulk Blast Machines

Call For Pricing SKU: 24631
Manufacturer
2 Cuft Classic Blast Machines
2 Cuft Classic Blast Machines

Model 1642 holds 2 cubic feet of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 5 (5/16-inch) nozzle.
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Stock # Piping Size Working Pressure Rating Description Price
27501 1″ 150 psi 1642; 2 cuft TLR-100 w/MQV Quantum 2,930.00
$2,808.00 SKU: 27501
Manufacturer
2 Cuft Contractor Blast Machines
2 Cuft Contractor Blast Machines

The high-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

Call For Pricing
Manufacturer
20 Cuft Classic Blast Machines
20 Cuft Classic Blast Machines

Model 3661 holds 10 cubic feet of abrasive.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Available Options

$8,892.00 SKU: 21078
Manufacturer
clemco model 1648 3 cuft classic Blast Machine
3 Cuft Classic Blast Machines

Model 1648 holds 3 cubic feet of abrasive providing approximately 15 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle.
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Requirements for Operation These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft. Available Literature:

Available Options

Stock # Piping Size Model 1648 3 cuft Portable Price
01179 1-1/4″ TLR-300 with FSV Yes 3,168.00
23767 1-1/4″ TLR-300 w/MQV Quantum Yes 3,168.00
$3,200.00
Manufacturer
3.5 cu ft BlastPot
3.5 cu ft Blast Pot

This popular system features the fine abrasive metering capabilities of the MV 2®/ComboValve® controls, VBS™ blowdown suppression for safe and quieter blowdown and one of the lowest pressure drops in the industry for added productivity.

Call For Pricing
Manufacturer
4 Cuft Contractor Blast Machines
4 Cuft Contractor Blast Machines

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

$3,798.00 SKU: 21505
Manufacturer
6 cuft AQV Quantum Pressure-Hold Remotes w/ACS
$4,419.00 SKU: 20672
Manufacturer
6 Cuft Classic Blast Machines
6 Cuft Classic Blast Machines

Model 2452 6 cuft TLR-300 w/MQV Quantum holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Requirements for Operation
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
  • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • One-man portable industrial-quality blast machines manufactured to ASME code.
  • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
  • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.

Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Available Literature:

$3,627.00 SKU: 23769
Manufacturer
Contractor Series Blast Machines
6 Cuft Contractor Blast Machines

6 cuft TLR-300 w/MQV Quantum

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation 
These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).


Available Literature:

Item # Description Price
21610 6 cuft contractor blast machine with Pressure-release Millennium remotes
Pneumatic
4,122.00
$4,122.00 SKU: 21610
Manufacturer
6 Cuft Lo-Pot Classic Blast Machines
6 Cuft Lo-Pot Classic Blast Machines

MOdel 2443; 6 cuft Lo-Pot TLR-300 with LPV Lo-Pot holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle. The Lo-Pot Blast Machines are designed for ease in abrasive loading.

High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.

Clemco's Classic machines are available in capacities 1/2 to 20 Cuft.

Stock # 21070

Available Literature:

$3,573.00 SKU: 21070
Manufacturer
6.5 Blast Pot
6.5 cu ft Blast Pot

The 6.5 cu. ft. blaster is a popular sized system for contractors and industrial/blast room applications. It is available with the fine abrasive metering capabilities of the MV 2®/ComboValve® controls or the advanced metering and control abilities of the Thompson® Valve II. A wide range of available options make this system fully customizable for any blasting operation.

Call For Pricing
Manufacturer
Clemco Big Clem bulk Blast Machine 60 cuft
60 Cuft Big Clem Bulk Blast Machines

Unbeatable for production, strength and safety

Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.

Big Clems are offered in three sizes: 60, 120 and 160 cubic feet(pressure vessel abrasive volume). Each size is available as stationary,yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.

Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.

Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.

Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces

Available Literature:
Big Clem Bulk Blast Machines

 

Call For Pricing
Manufacturer
Empire Blast N Vac with Vacutrans
Blast N’ Vac with Vacutrans

As environmental codes become more stringent, the demand for contained blasting rises. By enabling media recovery at the nozzle, Empire’s Blast N’ Vac® product line virtually eliminates the need to collect media manually, resulting in safer, cleaner blasting.

If you have been blasting with a single-pass abrasive, moving up to one of these self-contained units will save you time and money while eliminating many environmental headaches. The economic advantages of reusable media alone are enormous. Aluminum oxide, chilled iron and steel grit, for example, can be recycled from 6 to 200 times. Recyclable media are also more efficient and less dusty, resulting in greater productivity and a cleaner working environment.

Simple controls and easy media loading procedures make operating Empire Blast N’ Vac® machines effortless. The combination storage hopper/reclaimer automatically separates fines and dust from good media, and holds it until the pressure vessel is recharged. These systems are equipped with a hose manifold for quick set up and breakdown and three different Blast N’ Vac® heads as well as mufflers to attenuate sound.

Even if your application does not require containment at the nozzle, our Blast N’ Vac® packages and components will save you hours of back-breaking manual labor. The Vacutrans® media transfer tool, included with these units, can be used in conjunction with other accessories to vacuum up blasting abrasives, evacuate tanks, load hoppers, or recover chips from hand tools.

Call For Pricing
Manufacturer
Empire Econo-Blast Pot
Econo-Blast™ Portables

Econo-Blast portables are compact pressure blasters that share many features with their big brother, SuperBlast. Available in three sizes with grit capacities of 1, 1.5 and 3 cubic feet, these portables include ASME vessel certification for safety, flexible air hose for ease of maintenance, wheels for portability and a pressure gauge. Less grit capacity and smaller nozzles make these units ideal for spot blasting and detail work, particularly on a limited budget.

Larger Econo-Blast models can be equipped with Empire's patented Sure-Flo grit valve and 680 or 780 remote controls, described on page 9, for safety. With these controls, blasting stops when the nozzle is released.

Complete packages are available to protect the operator from blasting and potentially hazardous dust per OSHA requirements. Further, these packages include all the blasting equipment and accessories necessary to get you up and running safely.

Call For Pricing
Manufacturer
Empire FaStrip Portable
FaStrip Portable

When stripping operations involve delicate surfaces or require precise removal of old coatings, nothing beats FaStrip machines for speed, quality, safety or economy.

By delivering plastics, wheat starch or other soft media at low pressures, FaStrip makes it possible to strip delicate metallic or composite materials quickly and thoroughly without damaging the substrate.

Compared to alternative stripping methods, Empire’s FaStrip process offers a number of major benefits. When chemical agents are used to remove coatings, for example, rubber components, windows and other vulnerable areas must be thoroughly protected. Otherwise, those materials, plus underlying structures and controls, may be damaged. Also, residual caustics can later damage fresh paint.

With FaStrip, most of this prep work is unnecessary. For instance, masking does not have to be extended beyond the windows on to the paint, so a great amount of manual detailing is eliminated.

Because the FaStrip process does not employ toxic chemicals, it is safer for workers and the environment. In addition, less time is required for cleanup and the high costs for disposal of hazardous chemicals are reduced or eliminated.

In short, Empire’s FaStrip process offers three compelling advantages over alternative methods. It’s faster, safer and more efficient, which all adds up to better results and higher profits when you’re stripping expensive equipment.

FaStrip machines are available in cabinet models as well as portable units similar in configuration to the pneumatic blast and recovery systems shown above.

Call For Pricing
Manufacturer
PRS Blast Recovery Systems
PRS Blast & Recovery Systems

Reduce Operating Costs & Improve Finishes

Using “economical” blast media, such as slag, for industrial blasting can be very costly indeed. Because these low-cost abrasives break down so quickly, reusing them is impractical. As a result, you're constantly paying for replacement media, disposal of spent media, and manhours to move this material around – all of which can put a big drain on your profits.

With Empire's pneumatic Blast & Recovery System (PRS), you can tap the cost-saving advantages of more durable media for only a modest investment. Empire's PRS lets you move up to recyclable media, such as aluminum oxide, chilled iron and steel grit, which can be used effectively over and over – from 6 to 200 times. The result is usually a very attractive return on investment in media savings alone.

Reusable media are also faster acting and less dusty, meaning you get the additional advantages of increased productivity and a cleaner working environment. With the PRS, you can move blasting operations into enclosures to comply with increasingly stringent environmental regulations. And, because the PRS recycles good media while removing dust and fines, blasting results are more consistent.

Simple blast controls and convenient media-loading procedures make Empire’s PRS very easy to operate. A built-in access ladder and viewing window in the system’s storage hopper are just two examples of the PRS’s many friendly features. And, with heavy-duty duct, an Ultrawear-lined reclaimer, and a silicone carbide nozzle, you know the system is designed to last.

Skid chassis is standard.
All models available with optional dolly chassis for mobility.

Call For Pricing
Manufacturer
Empire SafeStrip Portable
SafeStrip™ Portables

Empire SafeStrip™ portables are designed specifically to handle fine, light media used in the cleaning and stripping of delicate substrates. SafeStrip portables quickly and safely remove old coatings, dirt, oil, corrosion and other unwanted residues from soft metals, rubber, plastics and other sensitive surfaces. They are ideal for work on statues, monuments, machinery and molds, and in many other applications requiring a “light touch”.

SafeStrip portables assure even flow of light media by creating a pressure differential between the pressure vessel and blast pressure. This pressure differential, which can be adjusted precisely with a manual valve, prevents bridging and produces consistent feed rates.

When used with non-toxic abrasives, such as bicarbonate of soda or wheat starch, SafeStrip portables are environmentally safe, as long as materials being removed from the work surface are also non-toxic.

Call For Pricing
Manufacturer
Empire Super Blast Pot
SuperBlast® Portables
  • Safe
  • Reliable
  • Efficient

Simplicity, safety, reliability and performance – those were our design goals when we engineered SuperBlast® Portables. Many years on tough jobs, such as removing corrosion, preparing surfaces for coating and maintaining heavy equipment, have proved that SuperBlast Portables deliver unmatched performance and exceptional value.

A look at the features highlighted above will show you that SuperBlast Portables are made of the “right stuff”. These rugged systems are the product of ingenuity and experience; they combine a host of standard features designed to boost productivity and profits. In addition, they can be ordered in a variety of configurations, including your choice of pneumatic or electric remote controls, a complete OSHA package and a full line of accessories.

SuperBlast makes short work of big projects; and performs small jobs in a snap. For the best blasting results, nothing beats SuperBlast.

Call For Pricing
Manufacturer