Aluminum Nozzle Holders
Aluminum Nozzle Holders

CHE nozzle holders include screws

Item # Item Name Fits hose Gasket List Price
For 3/4″ thread nozzles
00577 CHE-1/2 1-3/16" OD CQGP-1 gasket 08852 11.00
For 1-1/4″ thread nozzles
00578 CHE-1 1-1/2" OD CQGP-2 gasket 21584 11.00
00579 CHE-2 1-7/8" OD CQGP-3 gasket 08853 12.00
00580 CHE-3 2-5/32" OD CQGP-3 gasket 08853 13.00
00581 CHE-4 2-3/8" OD CQGP-3 gasket 08853 61.00
$61.00 Select options
BNP Suction Blast Guns
BNP Suction Blast Guns

BNP Gun Assemblies

Reference # Item # Description List Price
1 19041 Adjusting tool,BNP gun 94.00
2 11914 Nozzle holding nut, Knurled brass (std) 6.00
3 11574 Optional nozzle holding nut, urethane cover 47.00
4 08975 O-ring, BNP gun 2.80
5 11913 Lock nut, 5/8″ orifice 3.60
6 12097 Orifice sleeve 4.60
7 11802 Gun body, BNP 31.00
8 06369 Hose end, 1/2″ ba 7.00
9 15002 Hose end, 1/2″ flare 7.80
10 12476 Hose, media, clear/ft 8.00/ft
11 12471 Hose, media, black/ft 11.00/ft
12 12472 Hose, air/ft 4.40/ft

 

Item # Item Name List Price
04041 BNP gun diagnostic tool Vacuum gauge 3-30″ Hg 36.00

BNP Gun Assemblies (Orifice only)

Item # Item Name List Price
12301 #4 BNP – BNP Gun Assemblies 63.00
12302 #5 BNP – BNP Gun Assemblies 63.00
12303 #6 BNP – BNP Gun Assemblies 63.00
12304 #7 BNP – BNP Gun Assemblies 63.00
12305 #8 BNP – BNP Gun Assemblies 63.00

BNP Gun Assemblies

Item # Item Name List Price
12348 #3 – Orifice Assemblies 32.00
12342 #4 – Orifice Assemblies 32.00
12343 #5 – Orifice Assemblies 32.00
12344 #6 – Orifice Assemblies 32.00
12345 #7 – Orifice Assemblies 32.00
12346 #8 – Orifice Assemblies 32.00

Ceramic Nozzles

Item # Item Name List Price
11930 #5 (green tip) – Ceramic Nozzles 7.00
11931 #6 (blue tip) – Ceramic Nozzles 9.00
11932 #7 (red tip) – Ceramic Nozzles 13.60

Tungsten Carbide Nozzles

Item # Item Name List Price
13118 #5 – Tungsten Carbide Nozzles 47.00
12882 #7 – Tungsten Carbide Nozzles 68.00
11942 #8 – Tungsten Carbide Nozzles 68.00

Boron Carbide Nozzles

Item # Item Name List Price
11935 #5 – Boron Carbide Nozzles 96.00
11936 #6 – Boron Carbide Nozzles 102.00
11934 #6 – Boron Carbide Nozzles 192.00
11937 #7 – Boron Carbide Nozzles 104.00
12894 #8 – Boron Carbide Nozzles 106.00

Wide Spray Carbide Nozzles & Accessories

NOTE: Order retaining ring and nozzle nut separately

Item # Item Name List Price
11947 #6 tungsten carbide 68.00
11934 #6 boron carbide 192.00
11944 #8 boron carbide 212.00
12038 Retaining ring 12.00
11916 Nut, knurled brass 8.50
12906 Nut, urethane covered 46.00
12295 Nut w/ guard 65.00
$212.00
Manufacturer
Select options
Boron Carbide Lined Metal Jacketed BSD Series
Boron Carbide Lined Metal Jacketed BSD Series

Requirements for Operation
Nozzles are sized by the diameter of their orifices in 1/16-inch increments. A No. 2 nozzle has a 2/16-inch (1/8-inch) orifice, a No. 3 nozzle has a 3/16-inch orifice, etc. The size of the nozzle orifice determines abrasive and air consumption. Air consumption is measured in cubic feet per minute (cfm) at a given pressure.

When choosing a nozzle, consider the amount of available air in cfm, the capacity of the blast machine and the inside diameter of the piping, and the blast and air hoses. For optimal performance, these elements must be compatibly sized.

If too large a nozzle is used, low blast pressure and rapid wear on the blast hose will occur. If too small a nozzle is used, smooth media flow will be difficult to achieve.

Description of Operation 
The operator inserts the nozzle washer into a contractor-thread nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.

With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.

The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

Advantages

  • Boron Carbide liner material is the most abrasive-resistant, durable, and economical liner material.
  • Long-venturi nozzles allow high production blasting at a distance of 18 to 24 inches for hard-to-clean surfaces, and 30 to 36 inches for loose paint and soft surfaces.
  • Expected life with expendable abrasives is approximately 1000 hours.
  • 1-inch entry provides smooth transition and maximum productivity with 1-inch ID blast hose.

Available Literature:

Call For Pricing
Blast Hose Nozzle Holder
Nylon Nozzle Holders

The Clemco fiber-reinforced nylon nozzle holder attaches to the end of a blast hose and holds a contractor-thread blast nozzle.

The blast hose must be cut squarely and cleanly.  The nozzle holder is installed with the screws provided.  These screws penetrate the outer wall, but not the inner wall of the blast hose.

In operation, the air pressure inside the blast hose helps hold the nozzle holder securely in place.

A nozzle washer must be placed on the shoulder inside the nozzle holder to prevent premature wear and failure, of both the holder and the nozzle, from high-speed abrasive.

Advantages

  • Fiber-reinforced nylon material springs back from most impacts that would dent or deform metal nozzle holders
  • Lighter weight than metal nozzle holders
  • Precision dimensions
  • Large thread makes changing nozzle easy

Nylon Nozzle Holders

HEP nozzle holders include screws

Item # Model For hose Price
99173 HEP-3/4 1-5/16" OD $12.00
07720 HEP-1 1-1/2" OD $12.00
07721 HEP-2 1-7/8" OD $13.00
07722 HEP-3 2-5/32" OD $15.00

For Contractor Thread Nozzles

NHP nozzle holders include screws

Item # Model For hose Price
11398 NHP-3/4 1-5/16" OD $12.00
04106 NHP-1 1-1/2" OD $12.00
04127 NHP-2 1-7/8" OD $13.00
04128 NHP-3 2-5/32" OD $15.00
$15.00
Blast Hose Quick Coupling Nozzle Holders CAD
Quick Coupling Nozzle Holders

For flanged nozzles

Item # Description Price
For flanged nozzles
00575 CFFH-A aluminum 28.00
00576 CFFH-B brass 46.00
07718 FHP nylon includes lock-spring 17.00

For 1-1/4″ thread nozzle

Supplied with gasket, lockpin or lock-spring

Item # Description Price
00552 CFA aluminum (CQG 31.00
00592 SCF brass (CQG) 42.00
07716 CFP nylon (CQGP-3) includes lock-spring 20.00

For contractor thread nozzles

Supplied with gasket and lock-spring

Item # Description Price
07719 CFP nylon (CQGP-3) includes lock-spring 20.00

View Compatibility Chart

$46.00
Tungsten Carbide Lined Long Venturi Style
Tungsten Carbide Lined Long Venturi Style

A blast nozzle accelerates the air and abrasive as the mixture exits the end of the hose. The taper and length of the nozzle’s inlet and outlet determine the pattern and velocity of the abrasive exiting the nozzle. The composition of the liner material determines its resistance to wear.

Available Literature:

Available Products

Item # Model Length Washer Thread Entry Jacket Price
3/16″ Orifice – 45 cfm @ 100 psi
23519 TMP-3 4-3/4″ NW-25 Contractor 1″ Rubber 139.00
1/4″ Orifice – 81 cfm @ 100 psi
23520 TMP-4 6″ NW-25 Contractor 1″ Rubber 159.00
1/4″ Orifice – 81 cfm @ 100 psi
23521 TMP-5 6-1/4″ NW-25 Contractor 1″ Rubber 169.00
3/8″ Orifice – 196 cfm @ 100 psi
23522 TMP-6 7-1/4″ NW-25 Contractor 1″ Rubber 229.00
7/16″ Orifice – 254 cfm @ 100 psi
23523 TMP-7 8-1/2″ NW-25 Contractor 1″ Rubber 249.00
7/16″ Orifice – 254 cfm @ 100 psi
23524 TMP-8 9-3/4″ NW-25 Contractor 1″ Rubber 289.00
$289.00